金凤凰彩票app下载

全国咨询热线

企业动态

无框玻璃门的安装有什么要注意的点?

来源:http://www.wshdgj.com 日期:2019-08-29 发布人:admin
无框玻璃门的安装和普通玻璃门的步骤差不多,但是也有不一样的地方!下面济南感应自动门的小编就给大家介绍一下,希望对大家有所帮助!
The installation of frameless glass doors is similar to that of ordinary glass doors, but there are also some differences. Next, the small edition of Jinan Induction Automatic Door will introduce to you, hoping to help you all! 
1、在所有的安装步骤开始之前,必须要确保在室内装修装饰的其他工序都施工基本结束后才能进行,而且在放线定位时要严格按照设计图纸要求进行。
1. Before all installation steps begin, it is necessary to ensure that all other processes of interior decoration can be completed after the completion of construction, and the layout and positioning should be carried out strictly in accordance with the requirements of the design drawings.
2、无框玻璃门门框顶部限位槽的宽度应大于玻璃厚度2~4mm,槽深在20~30mm之间,以便注胶。
2. The width of the limit groove on the top of the frameless glass door frame should be larger than that of the glass thickness of 2-4 mm, and the groove depth should be between 20-30 mm for injection.
3、在外包金属装饰面时,要把饰面对头接缝放置在安装玻璃的两侧中间位置。接缝位置必须准确并保证垂直。
3. When wrapping the metal decorative surface, place the decorative head seam in the middle of both sides of the installation glass. The seam position must be accurate and vertical.
济南感应自动门
4、在安装无框玻璃门的玻璃门扇时的就位方法是:应把玻璃上部插入门框顶部的限位槽内,然后把玻璃的下部放到底托上对正中心线,并对好两侧门框的安装位置,使厚玻璃的两侧边部正好封住门框的金属饰面对缝口,要求做到内外都看不见饰面接缝口。
4. When installing glass doors with frameless glass doors, the positioning method is to insert the upper part of the glass into the slot at the top of the door frame, then place the lower part of the glass on the bottom bracket to the center line, and fix the installation position of the door frames on both sides, so that the metal decoration of the door frame is just sealed against the seam on both sides of the thick glass. No decorative seams can be seen inside or outside.
5、在注玻璃胶封口时,注入顺序应从某一条缝隙的端头开始到末端终止,中途不得停顿。
5. When sealing with glass injection glue, the injection sequence should start from the end of a slot to the end, without stopping halfway.
6、在进行无框玻璃门的玻璃之间对接过程中,对接缝的玻璃切口必须倒用,并且在玻璃固定后,要用玻璃胶入缝隙中,注满后同样要用塑料片把胶刮平,使缝隙形成一条洁净的均匀直线,玻璃面上要用干净布擦净胶迹。
6. In the process of docking between glass doors without frames, the glass incision of the docking seam must be reversed. After fixing the glass, the glass should be glued into the crevice. After filling, the plastic sheet should also be used to scrape the crevice flat so as to form a clean uniform straight line, and the glass surface should be cleaned with a clean cloth.
今天就暂且和大家聊到这里,希望这篇由济南感应自动门的小编整理知识可以帮助到您,如果您对此还有疑问,详情请咨询我们的官网。http://www.wshdgj.com
Today I'm going to talk to you for a moment. I hope this little Tidy-up knowledge of Jinan Induction Automatic Gate can help you. If you have any questions about it, please consult our official website for details. Http://www.wshdgj.com

上一篇:玻璃隔断适合放在家里的哪些地方?
下一篇:办公室采用玻璃隔断,空间不再压抑拥挤!

新世佳彩票APP下载 88彩票app 58彩票网 趣彩彩票app 永盛彩票注册 金凤凰彩票app 58彩票网 凤凰娱乐彩票APP 博乐彩票app下载 博乐彩票app下载