In the process of decoration, most owners will choose to use partition design, especially the use of glass partition, which is simple and generous and can enhance the visual impression, so how to do this partition? What is the installation process of glass partition? Let's get to know each other!
How to fix up and down the glass partition
1. In fact, we should consider that glass can not stand on the ground, and must be slotted up and down. Fix the groove with big core board, and add wood cover.
2. Glass partition is made of big core board, which can be pasted with aluminum-plastic board, teak, oak, cherry, walnut, etc.
3. The big core plate can be fixed by leaving a glass slot, and the top surface also needs to be molded to leave a glass slot, which is almost the same.
4. There is a glass clamp at the position of gypsum board. Fix the glass clamp with angle steel and connect it with the floor slab. Fix the position. Here is a clamp with the surname L. after putting the glass in place, there is a stainless steel bar to fasten it. You can change the glass and connect it flexibly. The door won't say.
How to install the glass partition
1. Line snapping
According to the horizontal line of the floor design elevation, measure the height along the wall to the ceiling design elevation, snap the vertical elevation line of the glass partition along the wall and the horizontal line of the sky and earth keel, and draw the dividing position line of the keel on the horizontal line of the sky and earth keel.
2. Installation of large keel
1. Ground bone installation: fix the keel of heaven and earth according to the design requirements. If there is no design requirement, it can be fixed with Ф 8 ~ Ф 12 expansion bolts or 3 ~ 5 inch nails. The spacing between the fixed points of expansion bolts is 600 ~ 800mm. Anti corrosion treatment shall be done well before installation. 2. Install along the wall keel: fix the side keel according to the design requirements, and open the plastering and closing groove for the side keel. If there is no design requirement, fix it with Ф 8 ~ Ф 12 expansion bolt or 3 ~ 5 inch nail and embedded wood brick, with the fixed point spacing of 800 ~ 1000mm. Anti corrosion treatment shall be done well before installation.
3. Installation of main keel
According to the design requirements, the main keel shall be fixed according to the location of the grading line, and fixed with 4-inch iron nails. Each end of the keel shall be fixed with at least three nails. It must be installed firmly.
4. Installation of small keel
According to the design requirements, fix the small keel according to the position of the grading line, and fix it with the tenon or nail. It must be installed firmly. Before installing the small dragon bone, you can also open the installation glass slot on the small keel according to the specifications of the installed glass.
What is the installation process of glass partition? How to fix the partition up and down more reliable?
5. Install glass
According to the design requirements, the glass shall be installed on the small keel according to the specifications of the glass; if the strip is used for installation, the strip on one side of the glass shall be fixed first, and the rubber pad shall be used under the glass, and then the strip shall be used to fix the glass; if the glass is fixed directly with the glass glue, the glass shall be installed in the pre reserved groove of the small keel first, and then sealed and fixed with the glass glue.
6. Glazing glue
Firstly, the paper tape is pasted around the glass. According to the design requirements, all kinds of glass glue are evenly placed between the glass and the small dragon bone. After the glass glue is completely dry, tear off the paper tape.
7. Installing the bead
According to the design requirements, the battens of various specifications and materials shall be fixed on the small keel with straight nails or glass glue. If there is no requirement in the design, 10 * 12mm wood battens, 10 * 10mm aluminum battens or 10 * 20MM stainless steel battens can be selected as required.
The above is about the glass partition technology, which is provided by Jinan glass partition finishing. If you want to know more, please contact us http://www.wshdgj.com Website.