金凤凰彩票app下载

全国咨询热线

常见问题

玻璃隔墙装饰材料的选择有哪些要求?

来源:http://www.wshdgj.com 日期:2020-05-08 发布人:admin
  玻璃隔断墙的安装质量将直接影响人们的工作效率和企业形象。因此,在进行办公装修设,既要注重美观,又要注重实用。那么,玻璃隔墙装饰材料的选择有哪些要求和规范?
  The installation quality of glass partition wall will directly affect people's work efficiency and corporate image. Therefore, in the design of office decoration, we should pay attention to both beauty and practicality. So, what are the requirements and specifications for the selection of decorative materials for glass partition?
  材料要求是什么
  What are the material requirements
  一、钢材:钢材表面需镀锌或无机富锌涂层。
  1、 Steel: the steel surface shall be galvanized or inorganic zinc rich coating.
  二、铝合金玻璃隔断装修时,铝合金表面应进行氧化、电泳涂装、粉末喷涂、氟碳喷涂。
  2、 During the decoration of aluminum alloy glass partition, the surface of aluminum alloy shall be oxidized, electrophoretic coating, powder coating and fluorocarbon coating.
  三、保温材料规范:带状工艺保温铝型材保温材料:聚酰胺+玻璃纤维;浇注工艺保温铝型材保温材料:聚氨酯。
  3、 Thermal insulation material specification: Ribbon process thermal insulation aluminum profile thermal insulation material: polyamide + glass fiber; casting process thermal insulation aluminum profile thermal insulation material: polyurethane.
  四、玻璃隔断墙采用奥氏体不锈钢,镍含量不低于百分之八。
  4、 The glass partition wall is made of austenitic stainless steel with nickel content not less than 8%.
  五、高隔室中空玻璃要求:气层厚度≥9mm,采用双重密封,一种为丁基热熔密封胶,另一种为硅酮密封胶。
  5、 Requirements for insulating glass of high compartment: the thickness of gas layer is ≥ 9mm, double sealing is adopted, one is butyl hot-melt sealant, the other is silicone sealant.
济南玻璃隔断
  六、暗框、半暗框玻璃隔墙安装时,玻璃与铝的粘结需要采用中性结构硅酮密封胶,酸性硅酮结构密封胶不适用于所有玻璃隔墙和点支式镀膜玻璃隔墙。
  6、 During the installation of glass partition wall with concealed and semi concealed frames, neutral structural silicone sealant shall be used for the bonding between glass and aluminum, and acid silicone structural sealant is not suitable for all glass partition walls and point supported coated glass partition walls.
  七、玻璃隔墙采用夹层玻璃时,应采用聚乙烯醇缩丁醛薄膜作夹。
  7、 When laminated glass is used for glass partition wall, polyvinyl butyral film shall be used as clamp.
  八、玻璃隔断的橡胶制品应为三元乙丙橡胶、氯丁橡胶和硅橡胶。
  8、 Rubber products for glass partition shall be EPDM, neoprene and silicone rubber.
  九、当有采暖、通风和空调要求时,安装的玻璃隔断的气密性不低于3级。
  9、 When there are heating, ventilation and air conditioning requirements, the air tightness of the installed glass partition shall not be less than level 3.
  十、玻璃隔墙采用反射率不大于0.3的玻璃材料,有照明要求的玻璃隔墙的光折减系数不小于0.2。
  10、 Glass partition shall be made of glass materials with reflectivity no more than 0.3, and the light reduction coefficient of glass partition with lighting requirements shall not be less than 0.2.
  以上就是关于玻璃隔断墙对材料的要求有哪些的知识详解,希望这篇文章能够对大家有所帮助。
  The above is about the requirements of the glass partition wall on the materials. I hope this article can help you.

上一篇:济南玻璃隔断设计如何保持空气流畅?
下一篇:最后一页

凤凰娱乐彩票APP 苹果彩票app下载 天天彩票app下载 必赢彩票app 98彩票app下载 98彩票投注 鼎盛彩票app 58彩票网 58彩票网 财神彩票app下载