When installing the bathing partition, although the hardware fittings are small, they have a great impact on the use experience of the shower room, especially the flexibility of the pull rod/handle, roller slider and wall clip, and the nesting with the shower room. The following Jinan bathing partition manufacturers will give you a detailed analysis!
1. Stability of smooth handle tie rod
The handle should not be too sharp and angular, but smooth and effortless. The pull rod is very stable between push and pull. It is suggested that the retractable pull rod should not be used, and its strength is weak.
2. Smooth and good sealing of sliding track
Pulleys, wheelsets and tracks are difficult to judge by naked eyes the compressive resistance and weight-bearing capacity. The main reason is whether the nesting between pulleys and tracks and glass is good, the gap is small, and the push-pull is smooth. The general instruction indicates that the pulley material of stainless steel and high-grade synthetic material will be better.
3. Vertical and horizontal adjustment of wall clips is not hindered
This is a detail that owners can easily overlook. Wall clips refer to the hardware that connects the shower room and the wall. They must have good ability to adjust the vertical and horizontal directions themselves. If it is more rigid and inconvenient to adjust, it must not be used, so as to avoid the self-explosion caused by the distortion of glass in the process of installation and use.
This article is from: Jinan Bath Isolation. For more information, please click: http://www.wshdgj.com! We will provide you with a satisfactory service to ask questions. Welcome your call!