自动门现在在银行和一些酒店类的地方得到了广泛的应用,随着长时间的使用,感应自动门不可避免的会发生一些小故障,下面济南感应自动门厂家就为大家总结一种常见故障的解决办法,希望对大家有所帮助!
Automatic doors are now widely used in banks and some hotel areas. With the long-term use of induction automatic doors, some small faults will inevitably occur. Now Jinan induction automatic doors manufacturer summarizes a solution to common faults for you, hoping to help you!
1、自动门不停自开自关,可能发生的原因:
1. The automatic door keeps opening and closing by itself. The possible reasons are as follows:
1)雷达传感器失灵。
1) Radar sensor failure.
2)有活动物体处于感测范围。
2) There are moving objects in the sensing range.
3)门片开关碰到障碍物。
3) The door switch meets obstacles.
2、门扇开关时自动门速度太慢,可能发生的原因:
2. The speed of the automatic door is too slow when the door is on and off. The possible reasons are as follows:
1)控制器速度调整太慢。
1) The speed adjustment of the controller is too slow.
2)皮带可能太过松动。
2) The belt may be too loose.
3)电压异常。
3) Abnormal voltage.
4)活动门扇可能与导轨或与固定门扇发生摩擦或与地板发生摩擦。
4) The movable door fan may have friction with the guide rail or with the fixed door fan or with the floor.
5)止动轮与轨道摩擦。
5) Friction between stop wheel and track.

3、自动门门扇不能开启,可能发生的原因:
3. The automatic door and door can not be opened. The possible reasons are as follows:
1)感应器故障,检查感应器之感应灯号是否正常。
1) Inductor failure, check whether the induction lamp of the inductor is normal.
2)电线接头松胶。
2) Loose glue for wire joints.
3)皮带脱落。
3) Belt shedding.
4)可能马达过热,待冷却后便能恢复正常。
4) Maybe the motor is overheated and will return to normal after cooling.
5)控制器烧坏。
5) The controller burns out.
6)异物卡住。
6) Foreign body stuck.
7)电压异常。
7) Abnormal voltage.
Today's wonderful content will be introduced here for the time being. If you have other places you want to know, you are welcome to leave a message and comment on our official website of Jinan Induction Automatic Gate: http://www.wshdgj.com, or call our hotline directly. We will give you a satisfactory answer!